ekrPro Com
60
web guide controller EDV No.: MD.191.01.05/1.6.x
with analog sensors Date: 23.11.2007 Page: 1/1
Contents
Section A
General information
Symbols used in this manual
Table of contents
A 1 Description A1-1
A 1.1 General information A1-1
A 1.2 Utilisation A1-1
A 1.3 Housing versions A1-1
A 1.4 General definitions A1-2
A 1.4.1 Assignment of sensors to the guiding mode A1-2
selection keys
A 1.4.2 Inverting of the sensor signal A1-3
A 1.4.2 Size of oscillation amplitude related to sensor
scanning area A1-3
A 1.4.2 Oscillation types and curves A1-4
A 1.4.2 Allocation of FVGs for a FVGPro 2MK A1-4
A 1.5 Connectable components A1-4
A 1.6 Safety information A1-5
A 1.7 Emissions A1-5
A 2 Specifications A2-1
A 2.1 ekrPro Com
60
controller (version XT) A2-1
A 2.2 Optical edge sensor IR2001, IR2005 A2-3
A 2.3 Optical edge sensor IR2002 A2-3
A 2.4 IRS-U-2 A opto-electronic analog sensor A2-3
A 2.5 Ultrasonic edge sensor US2003, US2007, US2008 A2-4
A 2.6 Reflecting sensor TW 54 C 5 A2-4
A 2.7 Line sensor T 62 D 1 A2-5
A 2.8 Reflected light measuring light barrier R 42 D ... A2-5
A 2.9 Photoelectric fork sensor G 53 C2/5 A2-6
A 2.10 Switched power pack A2-7
A 3 Transport / Storage A3-1
A 4 Decommissioning A4-1
To Next Page
Loading...
Need help?
General
