Maintenance C 4
ekrPro Com
60
web guide controller EDV-No.: MD.191.01.05/1.6.x Chapter: C 4
with analog sensors Date: 23.11.2007 Page: 1/1
C 4 Maintenance
C 4.1 ekrPro Com
60
controller
The controller is maintenance-free.
Cleaning should be carried out using a dry, clean and soft cloth.
A commercial liquid cleaner may be used if the casing is very dirty.
Adhere to protection class IP 54!
Beware!
The controller has to be switched off!
C 4.2 Sensors
The sensor lenses have to be kept clean to ensure optimum
guiding results.
C 4.3 Electric motor
powered actuator
The electric motor powered actuator is maintenance-free.
C 4.4 Hydraulically
powered actuator
The hydraulically powered actuator is maintenance-free.
C 4.5 FVG-stepping motor
Power is continuously applied to the stepping motor
output stage, even when stopped. Therefore any work
undertaken on the interconnections must only be
carried out with the power switched off.
To Next Page
Loading...
