0
-4
Apr. 2007
DSC48
2. SAFETY TIPS
2.1 SAFETY GEAR
2.2.1 VENTILATING SYSTEM
The service should be performed in well-ventilated area. If
the engine should be started in an enclosed place, the ex-
haust gas pipe should be installed.
2.2.2 SAFE WORKING PLACE
The work should be done in a wide, level and safe place to
prevent slip and fall accident.
2.2.3 ILLUMINATION
The work place should be well illuminated. If working in a
dark place or under the combine harvester, use the work
lamp. The work lamp should be covered by the safety cov-
er. The bulb can cause fi re due to leaked fuel if it is broken.
2.2.4 SAFETY EQUIPMENT
Be sure to keep a fi rst aid kit and fi re extinguisher handy at
all times.
2.2.5 CLEAN WORKING AREA
Keep the working area clean before and during work. If any
oil or fuel is spilled, it should be cleaned up immediately.
T46W006A
When working on the combine harvester, wear safety
gloves, safety shoes, ear plugs, safety goggles, safety
helmet, working clothes, etc. appropriate for your work-
ing environment. Never wear loose fi tting clothing or a tie
which can be caught to the rotating part. According to the
statistics, most accidents that occurred with rotating parts
are due to this inappropriate manner of wearing clothes.
2.2 WORK PLACE
T46W007A
T46W008A
• California Proposition 65 Warning
Inhaling exhaust gas can cause cancer or damage the
generative function leading to infertility.
WARNING
To Next Page
Loading...
Need help?
General
