Daedong DSC48 - GENERAL

GENERAL
DSC48
1. OVERVIEW .............................................. 1-3
1.1 Combine harvester identifi cation .............. 1-3
1.2 Specifi cations ........................................... 1-4
1.3 Maintenance schedule table
(* If there is any
faulty part, replace it.) ...................................... 1-6
1.4 Oil and coolant change schedule ........... 1-10
1.4.1 Table for changing of oil/coolant ...1-10
1.5 Loctite and liquid gasket application ...... 1-11
1.5.1 Loctite application ......................... 1-11
1.5.2 Liquid gasket application .............. 1-12
1.6 Oil specifi cation and capacity ................. 1-13
1.7 Tightening torque ...................................1-14
1.7.1 General use bolts and nuts ........... 1-14
1.7.2 Stud bolts ...................................... 1-14
1.7.3 American standard screws, bolts and
nuts with UNC or UNF threads ........1-15
1.8 Unit conversion table .............................. 1-16
1.9 Check and maintenance .......................1-17
1.9.1 Check before starting engine ........1-17
1.9.2 Adjusting the belts ...................... 1-18
1.9.3 Initial 50 hours ............................ 1-19
1.9.4 Every 50 hours ........................... 1-25
1.9.5 Every 100 hours ......................... 1-27
1.9.6 Every 150 hours ......................... 1-29
1.9.7 Every 200 hours ......................... 1-29
1.9.8 Every 250 hours ......................... 1-32
1.9.9 Every 300 hours ......................... 1-32
1.9.10 Every 350 hours ......................... 1-34
1.9.11 Every 400 hours ......................... 1-35
1.9.12 Every 500 hours ......................... 1-37
1.9.13 Every 600 hours ......................... 1-38
1.9.14 Every 800 hours ......................... 1-38
1.9.15 Every 1000 hours ....................... 1-38
1.9.16 Every 2 years ............................. 1-38
TABLE OF CONTENTS