Daedong DSC48 - REMOVAL AND INSTALLATION OF THRESHING CYLINDER CONCAVE

4
-10
Apr. 2007
DSC48
417W412A 417W413A
1.4.2 REMOVAL AND INSTALLATION OF
THRESHING CYLINDER CONCAVE
1. Open the threshing chamber cover.
2. Loosen the bolts (3) (FR/RR) and pull out the blade
support mounting plate (2).
3. Open the threshing cylinder.
4. Remove the blade support (4).
5. Remove the concave (5) by rotating it.
• Work safely when attaching or detaching the blade
support.
CAUTION
417W414A
(1) Threshing chamber
cover
(2) Blade support mount-
ing plate
(3) Bolt
(4) Blade support
417W415A
(5) Concave (6) Threshing cylinder