Daedong DSC48 - Every 600 Hours; Every 800 Hours; Every 1000 Hours; Every 2 Years

1
-38
Apr. 2007
DSC48
1.9.13 EVERY 600 HOURS
A. REPLACING IDLE ROLLER: see page 5-8
B. REPLACING ROCKER ROLLER: see page 5-9
1.9.14 EVERY 800 HOURS
A. REPLACING TRACK ROLLER
• Check
Check if the roller does not rotate properly or is worn.
• Replacement
If it is worn 4 mm or more
B. CHECKING CRAWLER GUIDE
• Check
Check if its mounting bolts are loose or its inner surface is
worn.
• Replacement
If it is worn 4.9 mm or more
C. REPLACING CRAWLER: see page 5-6
D. REPLACING GRAIN SIDE FRAME (RH) AND
COVER: see page 3-13
E. REPLACING GRAIN SIDE FRAME (LH) AND
COVER (UPPER AND LOWER): see page 3-14
F. REPLACING ELEVATOR FRAME AND
COVER: see page 3-11
G. REPLACING STRAW SIDE RAIL (LH):
see page 3-14
H. REPLACING STRAW SIDE GUIDE PLATE
(RH): see page 3-13
I. REPLACING STRAW SIDE PRESS (LH/RH):
see page 3-10
J. REPLACING FEEDING DEPTH CONTROL
CHAIN: see page 3-21
K. REPLACING IDLE ROLLER: see page 5-7
1.9.15 EVERY 1000 HOURS
A. REPLACING AXLES (LH/RH): see page 5-12
B. REPLACING AXLE COVERS: see page 5-12
C. REPLACING NO. 2 LINER (NO. 2 THROWER):
see page 4-18
D. REPLACING NO. 2 THROWER BLADE:
see page 4-18
E. REPLACING NO. 2 OUTLET PIPE:
see page 4-19
F. REPLACING VERTICAL AUGER LINER:
see page 4-16
1.9.16 EVERY 2 YEARS
A. CHECKING COOLANT PIPE: see page 1-31
B. REPLACING FUEL PIPE: see page 1-29