Daedong DSC48 - COMPONENTS RELATED TO SIEVE CASE AND ROCKER SHAFT; REMOVAL AND INSTALLATION OF SIEVE CASE

4
-20
Apr. 2007
DSC48
1.9 COMPONENTS RELATED TO SIEVE CASE AND ROCKER SHAFT
(1) Rocker belt (3) Mounting bolt
(2) Tension lever
417W443A
(A) Set the blade unit in the fi rst row of the separator
drum facing upward.
417W444A
1.9.1 REMOVAL AND INSTALLATION OF
SIEVE CASE
A. REMOVAL PROCEDURE
1. Push up the tension lever and remove the rocker belt.
When removing the rocker shaft components, loosen
the nut and bolt of the pulley before removing the belt.
2. Unscrew two mounting bolts on the rocker shaft sup-
port.
4. Remove the sieve case.
(1) Sieve case
417W445A
3. To remove the sieve case easily, turn the separator
drum and stop it when one row of blades facing up-
ward.