Apr. 2007
3
-17
DSC48
1.5.7 ADJUSTMENT AND REPLACEMENT
OF FEEDING DEPTH CONTROL
CHAIN
A. ADJUSTMENT
Check if the chain is deflected or the roller is broken or
worn.
(1) Lock nut
(2) Adjusting bolt
(A) Interval: 1 ~ 2 mm
417W334A
B. REPLACEMENT
1. Replace the chain, when the chain is visibly worn or
damaged, sits on the drive sprocket due to its defl ec-
tion, or doesn't have enough clearance for adjustment.
417W157A
(1) Feeding depth control chain
(2) Adjusting nut
(3) Mounting nut
Standard interval 1 ~ 2 mm
To Next Page
Loading...
