Chapter 8 - Monitoring Screen Timer
122 Apollo Operator’s Manual
Part Number: 90 38 237, 6th edition
Screen Timer
Figure 87. Location of Start Timer Key - Standard ScreenThe timer function allows the user to time an event
using a soft key available in any operating mode.
To start the timer:
• Press the >Start timer< soft key (1 in Figure
87) on the standard, data, or trend screen.
To stop the timer:
Figure 88. Stop Timer Soft Key• Press the >Stop< soft key (1 in Figure 88). The
measured time is displayed on the key.
To reset the timer to zero after it’s stopped:
Figure 89. Reset Timer Soft Key• Press the >Reset timer< soft key (1 in Figure
89). The time is reset and the key label
changes back to >Start timer<.
1
1
1
To Next Page
Loading...
