Chapter 10 - Configuration Configuration During Operation
164 Apollo Operator’s Manual
Part Number: 90 38 237, 6th edition
System Info
Figure 131. System Info Configuration ScreenThe system info configuration screens display the
following information:
General info
- software versions of the individual components
- software options
- gas consumption and sampling rate of the patient
gas module
- operating hours of individual components
Trace 1, Trace 2, Trace 3
These selections display internal equipment states
and parameters.
Exiting Configuration
• Press the >Exit Config< soft key on the
configuration menu.
The settings are effective immediately and
remain in effect until the machine is switched
off.
To Next Page
Loading...
Need help?
General
