EasyManua.ls Logo

Dräger Apollo

Dräger Apollo
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 13 - Specifications Specifications
212 Apollo Operator’s Manual
Part Number: 90 38 237, 6th edition
Breathing System
Auxiliary Common Gas Outlet (CGO)
(Optional)
Total gas volume (without breathing hoses, incl.
absorber)
in Man. Spont typically 4.4 L
in automatic mode typically 4.7 L
(incl. piston
volume)
Compliance (without breathing hoses)
in Man. Spont typically 5.3 mL/
cmH
2
O
in automatic mode typically 2.4 mL/
cmH
2
O
Absorber volume 1.5 L
Total system leakage (as per EN 740) <150 mL/min at
30 cmH
2
O
Pressure limitation valve APL
Adjustment range 5 to 70 cmH
2
O
Accuracy between 5 and 15 L/min ±15% of measured value or ±3 cmH
2
O, whichever is
greater
Resistance (as per ISO 8835-2, dry conditions) Absorber in normal operation
(filled with Drägersorb
®
800 Plus)
Drägersorb
®
CLIC, in normal
operation
(filled with Drägersorb
®
800 Plus)
Inspiratory Expiratory Inspiratory Expiratory
at 5 L/min -4.6 cmH
2
O 4.0 cmH
2
O -4.5 cmH
2
O 4.2 cmH
2
O
at 10 L/min -4.3 cmH
2
O 4.2 cmH
2
O -4.0 cmH
2
O 4.3 cmH
2
O
Minimal Limited Pressure (as per ISO 8835-5) -3 cmH
2
O
Connection Dia 22mm ISO cone (male) with dia. 15mm ISO cone (female)
Pressure limitation max. 80 cmH
2
O at 18 L/min
Fresh-gas flow 0 to 18 L/min
(tolerances as in “Fresh Gas Data”, see
page 211)

Table of Contents

Other manuals for Dräger Apollo

Related product manuals