Installing the Drägersorb CLIC Adapter (Optional) Chapter 4 - System Setup
Apollo Operator’s Manual 43
Part Number: 90 38 237, 6th edition
Installing the Drägersorb CLIC
Adapter (Optional)
The appropriate adapter must be installed by
qualified experts, e.g., DrägerService.
Figure 22. Mounting the CLIC Adapter
To click the absorber into place:
1. Press the button; the mounting swings open.
• Before fitting, shake the
disposable absorber, e.g. by
turning it upside down several
times in order to loosen up the
soda lime.
• Remove seal from new
disposable absorber.
• Slide the new disposable
absorber onto the mounting and
2. Push the absorber into the machine until it
engages.
WARNING !
The disposable absorber must be clicked into
place before switching on the Apollo.This
ensures that the absorber is included in the leak
and compliance test for the machine.
1
2