EasyManuals Logo

Dräger Apollo Operating Instructions

Dräger Apollo
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
Chapter 13 - Specifications Specifications
210 Apollo Operator’s Manual
Part Number: 90 38 237, 6th edition
Operating Data
Electrical Data
Operating voltage 100 to 127 VAC, 50-60 Hz, 12.4 A max.
Power input 200 W typically, max. 1.5 kW with power drawn from auxiliary outlets
Uninterruptible power supply Fully charged batteries: at least 30 minutes;
Up to 90 minutes, depending on ventilation parameters
(auxiliary outlets are not powered)
Auxiliary outlets 2 outlets with automatic circuit breakers rated at 4 A each,
1 outlet for desflurane vaporizer rated 2 A; combined current for all outlets
is 6A.
The outlets are isolated against mains to reduce leakage current.
Connection for optional halogen lamp 12 V max. 10 W
Compressed gas supply at pipeline inlet
O
2
39 psi to 100 psi at max. 78 L/min (including max. output flow)
N
2
O 39 psi to 100 psi at max. 18 L/min
Air 39 psi to 100 psi at max. 18 L/min
Dew point >41°F below ambient temperature
Oil content <0.1 mg/m
3
Particles Dust-free air (filtered with pores <1 µm)
Driving gas consumption None
Noise emission in normal operation with
ventilation (breathing sound set to OFF)
<50 dB(A)
Protection class
Workstation I, in accordance with IEC 601-1
SpO
2
sensor Type BF
electrically isolated from protective conductor
Electromagnetic compatibility (EMC) Tested to IEC 601-1-2
m

Table of Contents

Other manuals for Dräger Apollo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dräger Apollo and is the answer not in the manual?

Dräger Apollo Specifications

General IconGeneral
BrandDräger
ModelApollo
CategoryMedical Equipment
LanguageEnglish

Related product manuals