Configuration During Operation Chapter 10 - Configuration
Apollo Operator’s Manual 163
Part Number: 90 38 237, 6th edition
Datalog Entries
Figure 130. Datalog Entries Configuration ScreenThe following settings can be selected in the Param
Settings configuration screen (refer to Figure 130).
Logbook entries triggered by
These settings determine when automatic entries will
be made in the datalog.
- Time Interval: 1, 2, 5, 10 (minutes)
Entries will be made at the specified time interval.
- Warning Alarms: Yes or No
Entries will be made with every occurrence of a
warning alarm (if set to Yes).
- Caution Alarms: Yes or No
Entries will be made with every occurrence of a
caution alarm (if set to Yes).