Air intake
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_8_7.60.1.html[11/12/2015 18:40:41]
Disassembly of the airbox
Loosen the hose clamps (11) and (1) and remove the drain hose (12) and the oil breather hose (2) from the airbox.
Remove the following electrical components
A Control unit (Sect. 6 - 12,
Electronic Control Unit (ECU));
B Solenoid starter (Sect. 6 - 3,
Starter contactor);
C Battery support (Sect. 6 - 2,
Battery support);
D Coils (Sect. 6 - 12,
Coil).
Note
Remove the air filter as described in Sect. 4 - 3, Changing and cleaning the air filters.
Reassembly of the airbox
Check the presence of the rubber block (19) on the airbox.
If removed, fit clamp (1) onto drain hose (2).
Install the drain hose (2) to the airbox, and set it so as hose slot (A) corresponds to arrow (B) on airbox.
To Next Page