12
Chap.1 z Features
oSpecial functions
The following functions/modes, which for-
merly could only be changed/used by ser-
vice personnel, have been made into user
functions/modes.
• Auto Clear
• Preprint
• Print Number Input Mode
• Change Initial Setting
• Fine Start
!0Adjusting the Printing Position
(vertical /horizontal)
In addition to vertical direction
adjustment,there is now a function for
adjusting the printing position in the hori-
zontal direction as well.
!12 in 1 Layout Mode
In conjunction with an ADF (optional), this
mode makes possible continuous printing
of 2 documents onto single sheets of pa-
per.
!2Key card counter
Raises the number of sections controlled
to up to 200
*7
. Versions with internalized
control panel also available.
*7: Standard: 30 sections. Using the counter (op-
tional) raises the number to 200 sections.
8. Options
qADF
Use of the ADF permits continuous plate-
making and printing of 30 documents (64g/
m
2
paper). The ADF's tray fits completely
inside the ADF, so as not to interfere with
loading/removal of printing paper.
wTape cluster
This permits sectionized printing, by in-
serting tape automatically during print-
ing.
eKey card counter
This magnetic card can control the num-
bers of prints and platemakings by up to
200 sections.
NOTE: Without this optional counter, the
number of sections controlled is 30 (stan-
dard).
rDrums
Replacing the drum with optional drums
permits printing with different colors.
tSorter
The newly-developed 25-bin tandem sorter
can sort up to 50 sets of sheets. A stapler
can be installed to staple the sets after
sorting.
yOn-line functions
*8
These enable data processed on a personal
computer or word processor to be directly
input and used for platemaking/printing.
*8: These functions require an IPC I/F kit and PC
interface.
To Next Page
Loading...
