Chap.1 ⁄0 Error Messages and Corrective Action
61
(2) KEYCARD COUNTER 3
1. About keycard counter 3
<<
Features
>>
There are the following types of keycard.
¡
Department cards (AA01-AA30)
Each cards is able to totalize the number of prints
and plates made on the DUPRINTER by a
particular department. One card is assigned to
each department, so up to 30 departments can be
handled.
*Extra cards (up to AA200) can optionally be provided, to
expand handling capacity to up to 200 departments.
¡
Control cards
The control cards come in a set of 3:
a CLEAR card, a RESTRICTION card, and a
TOTAL card.
*
The control cards should be kept by the printer
manager.
• CLEAR card (AA CLEAR)
For resetting to zero the print and plate counts of
individual department cards.
• RESTRICTION card (AA RESTRICTION)
For prohibiting or de-prohibiting use of individual
department cards.
Use this when department cards are lost, or other
applicable situations.
• TOTAL card (AA TOTAL)
For displaying the departments' print and plate counts on
the LC screen, for checking. The screen can display the
counts for 8(in S type models, 5) departments at a time.
When 2 DUPRINTERs equipped with KEYCARD
COUNTER 3 are used in tandem:
Use department cards AA01-AA30 with one
DUPRINTER, and a separate set of cards (BB01-BB30,
optionally supplied) with the other. Keep use of the cards
separate; do not use both AA and BB cards with one
machine.
AA01
AA CLEAR
AA RESTRICTION
AA TOTAL
BB01
IMPORTANT
¡CLEAR CARD
¡RESTRICT CARD
¡TOTAL CARD
To Next Page
Loading...
Need help?
General