Duplo Duprinter DP-43S User Manual

202
m Print Tray Section
chap.3
(1) Removing the Screen
m Drum Section
1) Remove the drum.
2) Remove the spring on the bottom end screen bar
to pull out the screen bar.
3) Remove 2 set screws on the top end screen bar to
pull out the screen bar.
4) Remove the screen from the drum.
: Do not rotate the drum reversely.
IMPORTANT
1) Pass the top end screen bar through the screen.
2) Attach the top end screen bar to the drum.
There is no difference between the top and bot-
tom of the screen.
3) Pass the bottom end screen bar through the
screen.
4) Hold the bottom end screen bar in parallel with
the drum and roll it up to the drum rotating the
drum normally.
5) Tighten the screen bar with the spring.
:The stainless screen does not return
to the original state once it is fold-
ed. Be careful to handle the screen.
IMPORTANT
Set screw on the end screen bar
Top end screen bar
Top end screen bar
Spring
Screw
Screw
Screen
Spring
bottom end
screen bar
Spring hanger
Bottom end
screen bar
Reinstallation

Duplo Duprinter DP-43S Specifications

General

Brand	Duplo
Model	Duprinter DP-43S
Category	Printer
Language	English