Duplo Duprinter DP-43S - Multiple Image Printing; 2 in 1 Layout Mode E Type Models

36
Chap.1 . Operation Procedures
2. Multiple Image Printing / 2 IN 1 Layout Mode
<<E type models>>
In the normal state (when the ADF is not connected), the screen shown below appears
when the Multiple Image Printing " " icon is selected after the MENU key is pressed.
• Icons for a single image " ", 2 images " ",
4 images " " and 8 images " " are
displayed on the screen. Press the icon for the
desired number of images.
aThe menu screen will reappear, with the se-
lected icon displayed in the status field.
If the optional ADF is connected, the screen shown below appears when the Multiple Im-
age Printing icon " " is selected after the MENU key is pressed. Selecting the " " icon
from this screen will activate the 2 in 1 Layout Mode.
2in1
2in1