z DUPRINTER Installation Instructions
chap.5
252
zDUPRINTER Installation
Instuructions
1. Before Installation :
Safety precautions
¡The precautions below are vital for safety and must
be taken.
WARNING
¡
Do not use a source voltage other
than that specified. Do not connect
multiple loads to a single outlet.
Fire or electrical shock can result.
¡
Do not place the machine in an
unstable position, such as on an
unsteady support or sloping area.
If the machine drops or falls over, a
person could get injured.
¡
Do not place the machine in a
humid or dusty area. Fire or
electrical shock can result.
¡
When installing the machine, set
the caster locks. If the machine fall
over, a person could get injured.
¡
To move the printer, push on the
machine base. Do not push on the
printer itself, or it could fall over.
2. Installation Instructions
(1) Unpacking Checks
¡
Use only the power cord that is
provided among the accessories.
Insert the power cord plug firmly
into the socket, so that proper
electrical contact is effected.
a
Use of any other power cord could
result in imperfect grounding.
If grouding is imperfect and
electrical leakage occurs, fire or
electric shok could result.
q Packages for 1 complete DUPRINTER:
• 1 printer unit package
• 1 base unit package
Check that the above 2 packages are present.
w Unpack the various packages.
Item Quantity
Printer unit proper 1
Installation instructions 1
Instruction Manual 1
Warranty 1
Master ejection core 1
Power cord 1
Master holder 1set(2)
Editing pen* 1
Item Quantity
Base unit proper 1
Guide pin 2
: Carry out unpacking in a place that
is safe for the work.
IMPORTANT
e Contents checks for each package.
Check that the packages have the contents listed
below.
Base unit package
Printer unit package
* Check the unit's casters for abnormality.
* DP-43E,33E,31E
To Next Page
Loading...
Need help?
General