147
n Paper Ejection Section
chap.2
2nd speed
175rpm
115rpm
135rpm
150rpm
5th speed
Description
The paper ejection belt takes the paper stripped off the drum by the paper stripper finger to the paper stacker.
The belt is driven by the paper ejection belt motor. Its speed is sensed by an encoder sensor.
1. Paper ejection belt speed
The paper ejection belt is controlled to the speed that matches the printing speed.
The belt speeds that are set for the various printing speeds are shown in the table below. The set speeds can
be adjusted using HELP01.
Printing speed
Paper ejection belt speed
3rd speed
4th speed
200rpm
1st speed
Red
Black
Paper ejection belt motor
Paper ejection belt motor
Encoder sensor
Red
Gray
Blue
Drive PCB unit
(4) Paper Ejection Belt
Circuit
Encorder sensorPaper ejection belt motor
Drum unit
Paper stripper finger
Paper ejection belt
HELP mode H-01 \ see p.297
63S00226
To Next Page
Loading...
Need help?
General