34
Chap.1 . Operation Procedures
.Operation Procedures
1. Printing <<E type models>>
• LCD panel
1 Set document
2
3
4
5
PLATEMAKING
Input the number of prints and
the number of sheets
PRINT key
END
PAPER SIZE key
PRINT SIZE key
PHOTOGRAPH MODE key
Menu key•Multiple Image Printing icon
2in 1
Menu key• icon•Platemaking Density(darkness) icon
Menu key• icon•Print Density(ink transfar amount) icon
Menu key•Erasing Book Shadow icon
PRINTING POSITION ADJUSTMENT key
PRINTING SPEED ADJUSTMENT key
TEST PRINT key
Selects the paper size
Selects Text/Photograph/Text-Photograph/
Fine Lettering/Halftone Dot/Dark Photo Mode
Multiple Image and 2 in 1 printing are only
possible when the optical ADF is used
selects image-taking dencity
(darkness)
Erases shadows from book documents
If the number of prints is set in advance,
printing will start automatically at the end
of platemaking
Adjusts the printing position
Adjusts the printing speed
Adjusts the print density
Executes test printing (of 1 sheet)
Input the number of prints and the number
of sets (using the numeric keys)
Selects the magnification factor
(including auto zoom and zoom)
To Next Page
Loading...
Need help?
General