Duplo Duprinter DP-43S User Manual

211
4
, Electrical System........................................................239
(1) VR Adjustment of End Mark PCB Unit ..............239
(2) Adjusting Reduction / Enlargement ....................240
1. Adjusting the Longitudinal R/E
on the Platemaking Side ...................................240
2. Adjusting the Longitudinal R/E
on the Reading Side...........................................240
3. Adjusting the Lateral R/E
on the Reading Side...........................................241
(3) Reading Start Position .........................................242
1. Adjusting the Top End Reading
Start Position .....................................................242
2. Adjusting the Lateral (Operation Side)
Reading Start Position ......................................242
(4) Adjusting the Platemaking Start Position..........243
1. When the Scanner Is in Use..............................243
2. When in Online..................................................243
(5) Adjusting the Document Reading Darkness.......244
1. Adjusting the White Level of the
Document Darkness ..........................................244
2. Adjusting the Reading Darkness......................245
(6) Adjusting of Printer Unit's Printing Speed.........246
1. Pre-stop Speed Adjustment...............................246
2. JOG Speed Adjustment .....................................246
3. Adjustment of Printing Speeds 1-5...................247
4. To Initialize Speed Settings ..............................247
(7) Adjustment of Ejection Belt Printing Speed .......248
1. Adjustment of Ejection Belt Speeds 1-5 ...........248
2. To Initialize Speed Settings ..............................248
. Option .........................................................................249
(1) Adjusting and Replacing the Upper /
Lower Blade for the Tape Cluster ........................249

Duplo Duprinter DP-43S Specifications

General

Brand	Duplo
Model	Duprinter DP-43S
Category	Printer
Language	English