345
c HELP Mode Function and Operation Procedures
chap.7
H-43, H-44
(1) Adjustment / specification settingHELP mode
- L -
During memorization:
****
¡H-44
r
Press the Stop key.
t
Access HELP mode H-44. (Refer to qabove for procedure)
y
Use the [0] and [1] numeric keys to enter a 4-place binary value for
the desired resistance ranking. See the table in wabove for 4-place
binary values and the corresponding rankings.
i
Press the STOP key. The HELP mode selection display will
reappear.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
u
Press the [=] key. The correction amount will be memorized
in the battery PCB unit's EEPROM. During memorization, "-L-"
will be displayed.
Do not turn off the power before the "-L-" display has disappeared.
IMPORTANT
- L -
During memorization:
e
Press the [=] key. The correction amount will be memorized
in the battery PCB unit's EEPROM. During memorization, "-L-"
will be displayed.
Do not turn off the power before the "-L-" display has disappeared.
IMPORTANT
To Next Page
Loading...
