39
Chap.1 ⁄0 Error Messages and Corrective Action
Message
See page
4
62,78
62,78
62,78
62,78
62,77
E type : 65
S type : 71
Cause and corrective action
The printer is not ready. Please wait with the power ON.
If the message remains after a few minutes, turn the power
OFF and ON again. If the message still remains after a few
minutes, turn the power OFF and contact your service person.
Insert the key card into the key card counter.
Please insert card.
Cannot read key card. Please reinsert the card.
Key card reading is in progress. Please wait.
You have inserted an unusable card. Check the card for dirt
and scratches, then reinsert the card.
Insert the highest-numbered of the cards that are to be used.
You inserted suspended card. Use a different card or cancel
the card's suspension.
4
Cannot print.
This message is displayed if you press (PRINT) or
(TEST PRINT) keys without making a plate immediately
after a master setting error or master ejection error, or when
the confidential safeguard function is ON.
4
Printing is not complete. Either press (PRINT) key to
resume printing or press (CLEAR) key to clear the
counter.
CANNOT PRINT
PRINTING
PLEASE WAIT
PLEASE INSERT CARD
RE-INSERT CARD
NOW READING CARD PLEASE WAIT
CANNOT USE THIS CARD
MAXIMIZING CARD
CARD IS WRITE PROTECTED
To Next Page
Loading...
Need help?
General