Epson Stylus Pro 10000 - Page 326

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 319
Printer Setting Menu
Table 8-6 shown the Printer Setting Menus.
NOTE: Underlined values are the default settings.
Table 8-6. Printer Setting Menus
Setting Item LCD panel Display Setup Values Detail Reference
PG Setting PLATEN GAP
NARROW, AUTO
, WIDE Adjusts the platen gap. (Normally, leave set to Auto.)
page 320
Page Lines PAGE LINE
ON, OFF
When Auto Cut Off is selected on the operating Panel, this setting
determines whether a line for manual cutting is printed.
page 320
Interface Select INTERFACE
AUTO, PARALLEL, USB, OPTION1,
OPTION2
Determines which interface the printer checks for data.
(Auto continuously checks all interfaces and is good for normal use.)
page 320
Code Page Switching CODE PAGE
PC437, PC850
Character code setting.
(PC437: expanded graphics
PC850: multi-lingual)
page 320
Roll Paper Margin ROLL MARG
T/B 15MM
,
3MM, 15MM
Roll sheet margin setting.
• Top/Bottom 15mm:
top and bottom margins = 15mm
left and right margins = 3mm
• 15mm: all margins = 15mm
• 3mm all margins = 3mm
page 320
Detect Paper Width PAPER SIZE CHK
ON, OFF Determines whether the paper size check is enabled
page 320
Detect Skew Error PAPER ALIGN CHK
ON
, OFF Determines whether the paper skew check is enabled
page 320
Job Timeout Setting JOB TIMEOUT
OFF, 30sec, 60sec, 180sec, 300sec Job timeout
page 320
Panel Setup Value Initialization INIT SETUP
EXEC Initialize printer setup value
page 320
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com