Epson Stylus Pro 10000 - Page 328

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 321
Test Print Menu
Table 8-8 shown the Test Print Menus.
NOTE: (*1) When HC2/AY ink is set, it is not displayed. (Its setup value is
default.)
 Nozzle Check Pattern Printing
Selecting this mode allows the user to print the firmware version, the waste ink
counter value and the nozzle check pattern. "PAT PRINTING" is displayed during
printing pattern.
Figure 8-1. Nozzle check pattern
NOTE: Order of colors from left - black, cyan, magenta, yellow, light magenta,
light cyan.
Table 8-8. Test Print Menus
Setting Item LCD panel Display
Setup
Values
Detail Reference
Nozzle Check
Pattern Printing
NOZZLE CHECK PRINT
Print the nozzle check pattern.
page 321
Status printing
STATUS CHECK PRINT
Print the status sheet.
page 322
Job information
printing
JOB INFO PRINT
Print the job information.
page 322
(firmware version)
(waste ink counter)
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com