Epson Stylus Pro 10000 - Page 343

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 336
Initialize panel setup value
Selecting this mode allows users to initialize panel setup value to default.
Table 8-20 shows Initialization targets and post-initialization values.
M/W7 mode select
Followings can be selected for 360x720dpi M/W printing mode pattern.
 A: Constant paper feeding during Uni-D. Reduce banding by anomalous
paper feeding during Bi-D printing.
 B: Always Constant paper feeding
 C: Always Anomalous paper feeding
MW7 balance setup
Selecting this mode allows user to adjust feeding for each pass during printing on
MW7 mode B. Feeding are defined for each pass (set value is d)
 N th pass 1/720inch + d * Unit
 n+1 th pass 349/720inch - d * Unit
NOTE: * Unit is encoder resolution
MW7 balance setup
By setting minimum value for anomalous M/W feeding at this location, generation of
banding due to mechanical irregularities is kept to a minimum. Each setting has the
following significance.
Table 8-20. Panel Initialization Targets
Initialization Value after initialization
Setting the "PRINTER SETTING MENU"
Default
Job history
All erased
Total ink used counter
0
Total paper used counter
0
User paper setup
Default
Gap adjustment setup
Default
Table 8-21. Selectable M/W1: 720x720dpi for FOL operating mode (1~8)
Printing mode Setup Values
With 2Pass POL, Constant paper feeding1 (22Nzl POL)
1
Without 2Pass POL, Anomalous paper feeding 1
2
Without 2Pass POL, Anomalous paper feeding 2
3
Without 2Pass POL, Constant paper feeding 2
4
Without 2Pass POL, Anomalous paper feeding 3
5
Without 2Pass POL, Anomalous paper feeding 4
6
Without 2Pass POL, Anomalous paper feeding 5
7
With 2Pass POL, Constant paper feeding 3 (2Nzl POL)
8
With 2Pass POL, Constant paper feeding 3 (38Nzl POL)
9
With 2Pass POL, Constant paper feeding 5 (50Nzl POL)
10
Table 8-22. Selectable M/W: 1440x720dpi
Printing mode Setup Values
Without 4Pass POL, Anomalous paper feeding 1
1
With 4Pass POL, Constant paper feeding 1 (16NozlPOL)
2
With 4 Pass POL, Anomalous paper feeding 2 (40NozlPOL)
3
Without 8 Pass POL, Constant paper feeding 2
5
Without 8 Pass POL, Constant paper feeding 2 Bi-directional printing
6
With 4Pass POL, Constant paper feeding 3 (32NzlPOL)
7
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com