Epson Stylus Pro 10000 - Page 375

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Adjustment 368
Print position 3
Performs updating of parameters for Bi-D printing position alignment in PG very
small.
Figure 8-14 showing the print position 3 menu sequence.
Figure 8-14. Update print position 3 parameter menu sequence
Item
Item
Item
Item
Item
Item
Item
Item
SelecType
BiD3 240, V1, K 0
BiD3 240, V1, C 0
BiD3 240, V1, M 0
BiD3 240, V1, LC 0
BiD3 240, V1, LM 0
BiD3 240, V1, Y 0
BiD3 V2, K 0
12 3 4
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Item
SelecType
BiD3 V2, C 0
BiD3 V2, M 0
BiD3 V2, LC 0
BiD3 V2, LM 0
BiD3 V2, Y 0
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
12 3 4
SelecType
SelecType
SelecType
SelecType
Item
Item
Item
Item
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com