6/6
2. Replacement and adjustment of parts
26710
26710
Laser unit
Item Reference
Perform Exposure Magnification Correction.
☞36020
Perform Exposure Position Adjustment. ☞36030
Perform Exposure Magnification Fine Adjustment. ☞36040
Check the difference of the main scanning direction of the Exposure Position Adjustment again.
☞36030
Perform initial setup. -
Perform Paper Specification Registration/Setup and Magazine Registration/Setup. ☞32510
☞32520
Perform Letter blur check with NCE Mode. ☞32513
Perform Edge Brightness Correction Data Initialization.
Perform Brightness of the Edge.
☞32514
Perform Exposure Adjustment. ☞32515
Back up the data. -
Distributed by: minilablaser.com
To Next Page
Loading...