2. Replacement and adjustment of parts
27500
2/2
27500
F replenishment unit [F]
• If the F replenishment unit with no clamp is to be replaced with the F replenishment unit with a clamp, be sure to
remove the clamp.
If the clamp is not removed, the F replenishment unit is not normally installed.
1. Confirm that the F replenishment unit works normally using the output check.
F replenishment unit with no clamp F replenishment unit with a clamp
Cartridge set sensor
Clamp
Cartridge set sensor
Distributed by: minilablaser.com
To Next Page
Loading...