4. Troubleshooting
40500
9/12
40500
Attention message: Processor
No. 00510
Attach the Print Conveyor Unit.
Attention message release
YES or automatic release
• This attention message will be automatically closed when the print conveyor unit is set.
Condition
Check Point
Diagnosis
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
00000 The conveyor unit sensor turns LIGHT in the standby status after the drive has stopped.
1 Check if the conveyor unit sensor is soiled.
Failed part Manual No.
Conveyor unit sensor ☞63271
Processor I/O PCB 1
☞66210
Processor control PCB ☞66200
Processor power supply 1 ☞67400
Distributed by: minilablaser.com
To Next Page
Loading...