4. Troubleshooting
41900
2/3
41900
Attention message: Main
No. 01860−01997
Attention messages not explained in the Service Manual
Condition
IMPORTANT
• Attention messages not explained in this Service Manual are listed in the table.
See the EZ Controller Troubleshooting Manual and Connecting Unit Service Manual for Corrective action of Attention
message.
Attention message (Software)
See the Connection Unit Service Manual.
Attention message (Main)
Attention message table
No. 01850 The data was not written to the Network Folder. Would you like to output the data to a local folder?
No. 01851 This Order ID data already exists. Would you like to output the data to a local folder?
No. 01852 The data was not written to the Network Folder. Stop the process.
No. 01853 This Order ID data already exists. Stop the process.
No. 01854 Scanning data does not exist in the Controller database. Data in the EZLab database will be used instead.
No. 01861 Accessing the media. The writing will be canceled.
No. 01862 The size specified in the DPOF information is not correct. Would you like to read the file?
No. 01863 Auto Correction was not processed.
Attention message table
No. 01957 Reserve the order.
(See the T15/LS Connecting Unit Operator's Manual.)
No. 01982 Reserved orders remain. Delete all the reserved orders.
Attention message table
No. 01901 Selected optional function is not available. If you need to use, Install it.
No. 01903 Proceeding. One moment please. . .
No. 01908 A Picture CD could not be made. Confirm the settings.
No. 01922 Viewer Software was not found. Confirm the settings.
No. 01926 Set the Media Print Paper Fitting in Frame Print to "Cut", "Overall" or "Real Size".
No. 01939 The String is too long to register.
No. 01940 Invalid format. Failed to read.
No. 01941 Would you like to delete the selected Print Menu?
No. 01943 The setting has changed. Would you like to register?
No. 01944 Appropriate Print Menu was not found. Stop the process.
No. 01945 A tab where the Print Menu has not been set exists. Would you like to continue?
No. 01947 The selected Print Channel is used as a Print Menu Icon. Would you like to delete?
No. 01967 Input the Order ID.
No. 01973 EZLab is not set.
No. 01974 EZLab was not found.
No. 01975 The order was not found.
No. 01976 Failed to read the database.
No. 01977 There is insufficient space left on the disk. Stop the process.
No. 01980 Failed to import the file. Confirm the file is correctly selected.
No. 01981 Short Cut Key is selected overlapped.
No. 01995 Processing an order. Cannot change this setting.
Distributed by: minilablaser.com
To Next Page
Loading...