Need help?Do you have a question about the FSC A320 and is the answer not in the manual?
Provides a list of small graphic representations of each document page.
Provides a list of all document page titles.
Allows navigation through the document pages.
Allows searching for specific words or character strings within the document.
Expands the view of the currently visible document content.
Provides controls for zooming in and out of the document view.
Describes the different workspaces available in the IOS interface.
Lists common UI controls like text fields, buttons, and sliders used across workspaces.
Explains methods for selecting and entering data using text fields, buttons, and other controls.
Details the interface elements organized by tabs within the Control Board.
Lists training phases and steps within a selected lesson.
Allows scrolling and visualizing details of each lesson step.
Explains how lessons are structured into phases to meet objectives.
Categorizes lesson steps like notes, sim conditions, and malfunctions.
Describes buttons for controlling lesson execution like Autorun, Step-by-step, Execute.
Explains input fields for aircraft and environment parameters, accessible via keypad or wheel picker.
Allows modification of cloud and visibility parameters using dropdowns and input fields.
Allows viewing and changing aircraft altitude, airspeed, heading, and position.
Allows selection of Light, Moderate, or Severe icing conditions.
Allows selection of Clear Air, Thunderstorm, or Low Level turbulence types and intensity.
Explains input fields for aircraft parameters like GW, ZFW, and CG, accessible via keypad or wheel picker.
Interface for adjusting Gross Weight, showing keypad and slider controls.
Interface for adjusting Gross Weight Center of Gravity, showing keypad and slider.
Interface for adjusting Zero Fuel Weight, showing keypad and slider controls.
Interface for adjusting Zero Fuel Weight Center of Gravity, showing keypad and slider.
Interface for adjusting fuel weight, showing keypad and slider controls.
Buttons providing quick access to other sliding panels like DL, UL, VHF, etc.
Manages uplink/downlink messages, ATC, ADS, and ground station communication status.
Controls VHF/HF radio, intercom, and navigation audio signals.
Allows configuration of aircraft weight, balance, and fuel management.
Controls ground services, aircraft doors, and flight deck access requests.
Allows pre-selection and activation of aircraft malfunctions and circuit breakers.
Allows tripping and popping of hardware and software circuit breakers.
Provides an overall status of armed/active malfunctions, circuit breakers, and failed radios.
Explains input fields for airport parameters like airport, runway, time of day, etc., adjustable via keypad or wheel picker.
Allows selecting airports, repositioning aircraft to presets, and adjusting runway lighting.
Interface for setting the time of day using a keypad or slider.
Allows altering time of day and simulation speed.
Introduces runway wind conditions using quick selection or wind compass.
Interface for setting below cloud visibility using keypad or slider.
Allows changing visibility and fog parameters at the reference airport.
Introduces various types of precipitation like rain, snow, and hail.
Allows modification of cloud and visibility parameters for a reference airport region.
Interface for setting reference temperature using keypad or slider.
Interface for setting ISA temperature deviation using keypad.
Interface for setting airport sea level barometric pressure.
Introduces landing and takeoff windshear and microburst profiles.
Allows modifying runway surface contamination and roughness.
Allows setting units of measure for force, aircraft weight, and environment parameters.
Allows viewing and changing the current IOS configuration.
Provides options to end the current session or select another configuration.
A toggle button to activate/deactivate flight freeze mode, freezing flight parameters.
Allows performing various resets like environment, ISA & winds, systems, and session.
Allows performing Total, Position, Fuel, and Airspeed freezes.
Allows controlling and monitoring simulator systems like Visual, Motion, and Control Loading.
Allows control of simulation sound volume via input field or slider.
Allows repositioning the aircraft to preset positions via a roll-up menu.
Allows changing cloud and visibility conditions based on EASA/FAA standards.
Allows creating a flight capture into the indicated capture slot.
Allows printing the current screen or viewing printing options.
Allows accelerating or slowing down the simulation time.
Clears all armed or active malfunctions with a confirmation prompt.
Allows viewing notifications of events with color-coded severity icons.
Provides access to help for active panels and creating feedback zip files.
Allows choosing the application workspace to be displayed on the monitor.
Consists of INSTRUMENTS Tab and Instrument View Mode Section.
Divided into Canvas View Mode and List View Mode, showing lesson elements and steps.
Features tabs for various aircraft information like weight, performance, and communications.
Provides a 2D/3D representation of the virtual space showing aircraft, environment, and navigation aids.
Explains different radial menus (Cursor, Aircraft, Navaid, Airport, Storm) accessible from the map.
Controls map display features like zoom, auto range, scales, perspective, and symbols.
Contains controls grouped into Left, Middle, and Right sections.
Accesses controls for Weight & Balance, Doors, and ground services.
Allows changing airport/runway, repositioning, and slewing the aircraft.
Alters weather, time of day, microbursts, icing, and runway lighting.
Controls environmental conditions for airports and en route regions, offering scenario management.
Opens panels for windshear and microburst profiles, similar to Reference Airport.
Opens the ICING panel, similar to Current Conditions.
Allows changing time of day and simulation speed, similar to Reference Airport.
Controls airport lighting, including runway lights and visual effects.
Displays pages for setting up traffic scenarios with intruders.
Provides controls to customize intruder presence, position, vertical path, and transponder settings.
Accesses Communications and Datalink pages for audio and datalink parameters.
Monitors current ATIS voice messages and allows manual updates.
Simulates Air Traffic Control communications with various categories.
Provides access to pages for triggering malfunctions, circuit breakers, and radio failures.
Provides access to Upset Prevention and Recovery Training exercises.
Offers controls to trigger upset scenarios, monitor data, and record/review.
Allows initiation of Maneuver Based or Scenario Based Training exercises.
Displays RESET & FREEZES page for system resets and freezes.
Allows capturing and recalling flight situations for training review.
Allows recording and recalling flight situations with pre-defined parameters.
To Next Page
General