FSC A320 - RUNWAY CONDITIONS Tab; VISUAL CONTROL Tab; Marshaller; Recorded Traffic

A320 Neo Instructor Operating Station
Instructor User Guide
Advanced
13 Oct 2017
Page 246
16.3.6.1 RUNWAY CONDITIONS Tab
This tab includes read-only text fields that display the current runway conditions and
a Runway Conditions expandable button that upon tapping opens the RUNWAY
CONDITIONS sliding panel.
16.3.6.2 VISUAL CONTROL Tab
This tab includes the following buttons.
16.3.6.2.1 Marshaller
When the aircraft is within an appropriate position to the gate, the marshaller signals
in the aircraft to the gate.
From the Normal state, tap this toggle button to display the marshaller into the visual
scene.
From the Activated state, tap this toggle button to remove the marshaller into the
visual scene.
This Marshaller button is disabled depending on certain conditions, for example:
• When the aircraft is off the ground
• During an aircraft pushback
16.3.6.2.2 Recorded Traffic
Tap this expandable button to display the RECORDED TRAFFIC sliding panel
which allows the instructor to add recorded traffic scenario effects to the visual scene.
16.3.6.2.3 Scenario Traffic
Tap this expandable button to display the SCENARIO TRAFFIC sliding panel which
allows the instructor to add recorded traffic scenario effects to the visual scene.
16.3.6.3 AIRPORT LIGHTS Tab
This tab includes buttons to control airport lights.
16.3.6.3.1 Stop Bar
From the Normal state, tap this toggle button to illuminate the Stop Bar lights.
From the Activated state, tap this toggle button to extinguish the Stop Bar lights.
16.3.6.3.2 Taxi
Tap this dropdown button to expand selection, then select the taxi lights intensity.
(Min = 0, Max = 5).