FSC A320 - Copy to Stored Captures; Clear All Captures; FMS Memory Save;Recall

Instructor User Guide
Advanced
Advanced
13 Oct 2017
Page 295
Parameter
Standard FSCR Recall
On-Ground
In-Air
A/C Latitude
As per capture
Ground speed
As per capture
Computed as per current
conditions
Calibrated Airspeed
Computed as per current conditions
As per capture
Altitude ASL
Computed as per current conditions
As per capture
Rate of climb / descent
Computed as per current conditions
As per capture
Rate of change of body
velocities
Computed as per current conditions
As per capture
Pitch, Roll, Yaw Rates
Computed as per current conditions
As per capture
Accelerations
Computed as per current conditions
As per capture
Bank angle
Computed as per current conditions
Similar to value at capture (not
exact due to trimming)
Environment
Ambient Conditions
As per capture
Airport/En Route Environment
As per capture
Storms
As per capture
Runway conditions
As per capture
Reference Airport/Runway
As per capture
Ground elevation
As per capture
Miscellaneous
Ground power
Not modified
Ground air
Not modified
A/C on Jacks
Not modified
A/C on Chocks
Not modified
FMS Flight Plan
As per capture within FMS/FMGEC limitations
16.9.1.1 Copy to Stored Captures
Displays the Flight Situation Transfer page, used to transfer a temporary capture into
permanent stored capture. The button is disabled or grayed out if a capture, recall,
reposition, or slew is active.
16.9.1.2 Clear All Captures
Selection displays the Clear All Captures popup menu requiring confirmation.
16.9.2 FMS Memory Save/Recall
Displays status and selection activates the process that saves/recalls the selected FMS
Memory flight plan.