EasyManua.ls Logo

FSC A320 - Clear Malfunctions; Clear Failed Stations; Engine Exceedance; Fuel Used Indicator

Default Icon
329 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A320 Neo Instructor Operating Station
Instructor User Guide
Control Board Footer
13 Oct 2017
Page 176
Excessive flight acceleration on ground (exceedance)
Excessive jerk (rate of change of acceleration) on ground (exceedance)
Unstable flight acceleration on ground (exceedance)
Excessive engine thrust during pushback
Excessive engine thrust or brakes applied during pushback (option)
This button is disabled if the aircraft has not crashed. When selected, the button
remains active for 2 seconds.
11.2.6.1.7 Clear Malfunctions
Tap this button to clear all active and armed malfunctions.
This button is disabled if there are no active or armed malfunctions.
Tapping this button causes it to illuminate for two seconds.
11.2.6.1.8 Clear Failed Stations
Tap this button to clear all stations that were failed by the instructor.
This button is disabled when there are no failed stations.
Tapping this button causes it to illuminate for two seconds.
11.2.6.1.9 Engine Exceedance
Tap this button to clear the Engine.
Displays exceedances red box (N1, N2, and EGT) by moving the exceedances into
the next DEU flight leg.
This is achieved by setting the airspeed over 80 knots for 2 seconds.
This button is disabled if engine exceedance has not occurred.
Tapping this button causes it to illuminate for two seconds.
11.2.6.1.10 Fuel Used Indicator
Tap this button to reset the Fuel Used indicator. Tapping this button causes it to
illuminate for two seconds.

Table of Contents

Related product manuals