FSC A320 - Gate or Parking Spot Number; Reposition Presets Section; Medium Airwork

A320 Neo Instructor Operating Station
Instructor User Guide
REFERENCE AIRPORT Tab
13 Oct 2017
Page 106
9.2.2.2.1 Gate or Parking Spot Number
Tap the desired radio button to reposition the aircraft to the desired Gate/Parking Spot
position.
In this reposition preset, the aircraft is configured as follows:
Gear: Down
Flap: Flaps up
Speed brake: Stowed
Doors 1L, right fwd and aft cargo doors open.
9.2.2.3 Reposition Presets Section
This section includes mutually exclusive radio buttons that allow the instructor to
reposition the aircraft to various airborne positions in relation to the current reference
runway.
Note: This section also includes a takeoff position preset.
To reposition the aircraft to various airborne positions:
1) Tap on one of the position preset radio buttons.
2) Tap on the Reposition button to execute the repositioning.
Flight freeze is set at the end of the reposition.
9.2.2.3.1 Medium Airwork
Tap this radio button to reposition the aircraft to 10,000 ft (baro) relative to the
current reference runway if the transition altitude is higher than 10,000 ft for the
current location. If the transition altitude for the current location is less than or equal
to 10,000 ft, then the reposition will be to FL100.
In this reposition preset, the aircraft is configured as follows:
Gear : Up
Flap : Up
Speed: 250 KCAS
Altitude: 10000 feet ASL or FL100 as appropriate
Localizer Deviation: Centered
Profile : Level
Distance: 30 NM from reference runway
Note: Preset values are subject to change depending on the aircraft.