FSC A320 - Ice; SNOW - Patchy; Snow; SLUSH - ¼ in (6 Mm)

A320 Neo Instructor Operating Station
Instructor User Guide
REFERENCE AIRPORT Tab
13 Oct 2017
Page 156
9.14.1.7 ICE
Tap this button to add a predefined amount of ice on the runway.
This button is disabled when:
• The temperature is above 5 degrees Celsius.
• A wet runway is forced due to rain on the runway.
9.14.1.8 SNOW - Patchy
Tap this button to add patchy snow conditions on the runway.
The patchy snow effect is for visual purposes only.
This button is disabled when a wet runway is forced due to rain on the runway.
9.14.1.9 SNOW
Tap this button to add a pre-defined amount of snow on the runway.
This button is disabled when:
• The temperature is above 5 degrees Celsius.
• A wet runway is forced due to rain on the runway.
9.14.1.10 SLUSH – ¼ in (6mm)
Tap this button to add 1/4 inch (6 mm) of slush on the runway.
This button is disabled when:
• The temperature is lower than -5 degrees Celsius or above 5 degrees Celsius.
• A wet runway is forced due to rain on the runway.
9.14.1.11 SLUSH – ½ in (13 mm)
Tap this button to add 1/2 inch (13 mm) of slush on the runway.
This button is disabled when:
• The temperature is lower than -5 degrees Celsius or above 5 degrees Celsius.
• A wet runway is forced due to rain on the runway.
9.14.2 ROUGHNESS Tab
This tab includes a slider control to adjust the runway roughness between 1 to 5.
(1 = Smooth and 5 = Rough).