FSC A320 - Tailwind Increasing to XX Kt; Position; Y Position; Intensity Buttons

A320 Neo Instructor Operating Station
Instructor User Guide
REFERENCE AIRPORT Tab
13 Oct 2017
Page 148
9.13.2.2.2 Tailwind Increasing to XX kt
Tap this radio button to activate the predictive windshear profile described below:
• Tailwind increasing to XX kts.
• Windshear position will be initialized at 6000 feet before the runway threshold
on approach.
9.13.2.3 X Position
The X Position input text field displays the windshear X Position.
Tap the input text field to change the fixed windshear X position relative to the
touchdown point on the runway in nautical miles (Min = -8, Max = 5 nautical miles).
9.13.2.4 Y Position
The Y Position input text field displays the windshear Y Position.
Tap the input text field to change the fixed windshear Y position relative to the
touchdown point on the runway in nautical miles (Min = -3, Max = 3 nautical miles).
9.13.2.5 Intensity Buttons
The predictive windshear intensity buttons are mutually exclusive.
9.13.2.5.1 Light
Tap this button to set the predictive windshear profile intensity to light.
9.13.2.5.2 Moderate
Tap this button to set the predictive windshear profile intensity to moderate.
9.13.2.5.3 Severe
Tap this button to set the predictive windshear profile intensity to severe.
9.13.2.6 Turbulence
This read-only field displays the nominal intensity of the enabled turbulence.
9.13.2.7 Activate Windshear
Tap this button to activate the selected windshear profile. This button is disabled
when a windshear profile is activated.
9.13.2.8 Clear Windshear
Tap this button to deactivate the active windshear profile. This button is disabled
when no windshear profile is activated.