Instructor User Guide
REFERENCE AIRPORT Tab
REFERENCE AIRPORT Tab
13 Oct 2017
Page 137
9.8.6.3 Blowing Sand
Tap this button to activate the blowing sand effect on the visual scene.
From the activated state, tap this button to deactivate the blowing snow effect.
This button:
• Has no effect if the surface wind is set to zero.
• Is disabled when the temperature is below -5 degrees Celsius.
9.8.6.4 Lightning & Thunder
Tap this button to activate the lightning and thunder effect on the simulation.
From the activated state, tap this button to deactivate the lightning and thunder effect
from the simulation.
9.9 CLOUDS Sliding Panel
The CLOUDS sliding panel allows the instructor to modify cloud and visibility
parameters at the reference airport region. It consists of the same controls as the
CLOUDS sliding panel in the CURRENT CONDITIONS Tab.
Refer to paragraph 7.2 for details.
Note: The reference airport code and runway number will be located at the top
of the CLOUDS sliding panel.
To Next Page
Loading...