FSC A320 - LOG Tab; NEW UPLINK Tab; GROUPS Section; SCENARIOS Section

Instructor User Guide
AIRCRAFT Tab
AIRCRAFT Tab
13 Oct 2017
Page 55
8.8.1 LOG Tab
The LOG tab displays a history of communication between the simulated aircraft and
the simulated ground station, where the latest message is always displayed at the top
of the page.
This Tab includes the following buttons:
Clear One
Tap this button to clear the oldest message from the log. The
oldest message is located at the bottom of the history log.
Clear All
Tap this button to clear all logged messages in the DATALINK
LOG Tab.
Send Uplink
Tap this message box to display the NEW UPLINK tab.
8.8.2 NEW UPLINK Tab
The NEW UPLINK Tab allows the instructor to send uplink messages. This tab
includes the following sections:
• GROUPS
• SCENARIOS
• SCENARIOS
• Message Editor
8.8.2.1 GROUPS Section
This section lists all the various groups of scenarios for which uplink messages exist.
Tap on one of the GROUPS button to make your selection.
8.8.2.2 SCENARIOS Section
This section lists all the various uplink message categories within a selected group.
Tap on one of the scenarios button to view the available uplink messages for the
selected category.
8.8.2.3 SCENARIOS (Uplink Messages) Section
This section lists all the available uplink messages for the selected scenario (category)
8.8.2.3.1 Add Button
Tap the Add button next to an uplink message to add this uplink message into the
Message editor section.