Instructor User Guide
INSTRUCTOR STATION Sliding Panel
INSTRUCTOR STATION Sliding
Panel
13 Oct 2017
Page 159
10.1.3 Environment Units
Tap this dropdown button to expand selection, then tap to set the Environment Units
to Metric or Imperial.
10.1.3.1 Metric
Metric sets the environment units as defined below:
• QFE - hPa/mb
• QNH - hPa/mb
• Temperature - deg C
• RVR - m
• Visibility - km
• Wind - kt
• Runway Contamination Depth - mm
• Cloud Height - ft
10.1.3.2 Imperial
Imperial sets the environment units as defined below:
• QFE - inHg
• QNH - inHg
• Temperature - deg C
• RVR - ft
• Visibility - sm
• Wind - kt
• Runway Contamination Depth - in
• Cloud Height - ft
10.1.4 Automatic to Reference Airport
Tap this checkbox to set the unit of measure parameters to match those of the selected
reference airport.
10.2 CONFIGURATION Tab
The CONFIGURATION tab allows the instructor to view parameters of the current
IOS configuration and change the current IOS to another configuration.
To Next Page
Loading...