FSC A320 - Tailwind Increasing to XX Kt, Along with Downdraft, Triggered as A;C Climbs through 200 Ft AGL on T;O; LANDING PROFILE Section; Headwind Increasing to XX Kt, Switching to XXX Kt Tailwind, Triggered as A;C Descends through 1200 Ft AGL During Approach; Tailwind Increasing to XX Kt, Triggered as A;C Descends through 300 Ft AGL During Approach

Instructor User Guide
REFERENCE AIRPORT Tab
REFERENCE AIRPORT Tab
13 Oct 2017
Page 151
9.13.3.5 Tailwind Increasing to XX kt, along with downdraft, triggered as A/C climbs
through 200 ft AGL on T/O
Tap this radio button to activate the NP windshear profile described below:
• FAA Windshear Training Aid reference wind model #2
• Tailwind increasing to XX kt, along with downdraft, triggered as A/C climbs
through 200 ft AGL on T/O.
If a takeoff profile is tagged as being a QTG Windshear, then selecting that profile
enables the QTG Intensity button.
The QTG Intensity button causes the simulator environment (A/C gross weight, fuel
weight, CG, temperature, pressure, CG, windshear intensity) to be set as per the
associated QTG Windshear takeoff case.
9.13.3.6 LANDING PROFILE Section
This section list all available NP windshear landing profiles which are mutually
exclusive.
9.13.3.7 Headwind Increasing to XX kt, switching to XXX kt tailwind, triggered as A/C
descends through 1200 ft AGL during approach
Tap this radio button to activate the NP windshear profile described below:
• FAA Windshear Training Aid reference wind model #4
• Headwind increasing to XX kt, switching to XXX kt tailwind, triggered as A/C
descends through 1200 ft AGL during approach.
If a landing profile is tagged as being a QTG Windshear, then selecting that profile
enables the QTG Intensity button.
The QTG Intensity button causes the simulator environment (A/C gross weight, fuel
weight, CG, temperature, pressure, CG, windshear intensity) to be set as per the
associated QTG Windshear landing case.
9.13.3.8 Tailwind increasing to XX kt, triggered as A/C descends through 300 ft AGL
during approach
Tap this radio button to activate the non-predictive windshear profile described
below:
• FAA Windshear Training Aid reference wind model #1
• Tailwind increasing to XX kt, triggered as A/C descends through 300 ft AGL
during approach.