A320 Neo Instructor Operating Station
Instructor User Guide
Advanced
13 Oct 2017
Page 258
16.4.1.2.1 NUMBER OF INTRUDERS Section
This section includes the controls to set the number of intruders by:
• Moving the slider to the desired number
• Touching the input text field and entering the number of intruders using the
keypad
16.4.1.2.2 ALTITUDE SEPARATION MODEL Section
This section includes radio buttons allowing the instructor to select either one of these
models:
• RVSM – enRoute Vertical Separation Minima
• IFR – Instrument Flight Rules
• VRR – Visual Flight Rules
The selected number of intruders will be placed on the selected model.
16.4.1.2.3 INTRUDER TRANSPONDER SETTINGS Section
This section includes the controls allowing the instructor to set the type of Altitude
Reporting and ADS-B Reporting of the intruder’s transponder.
Altitude Reporting Refer to paragraph 16.4.1.1.4.1 for details.
No ADS-B Reporting This setting does not allow the transponder of intruders to
transmit their ADS-B information. When No ADS-B
Reporting is checked, ADS-B information is not being
reported.
ADS-B Reporting This setting allows the transponder of intruders to transmit
their ADS-B information such as position, speed and
direction of flight (latitude, longitude, vertical speed etc.).
When ADS-B Reporting is checked, ADS-B information
is being reported.
Mixed This setting sets a certain number of intruders with ADS-B
reporting and others with No ADS-B reporting.
16.4.1.2.4 OWNSHIP CAPACITY LIMITATION Section
This section includes a checkbox allowing or inhibiting bearing measurement from
the TCAS antennas. Refer to paragraph 16.4.1.1.5 for details.
To Next Page
Loading...