FSC A320 - NUMBER of INTRUDERS Section; ALTITUDE SEPARATION MODEL Section; Intruder Transponder Settings

A320 Neo Instructor Operating Station
Instructor User Guide
Advanced
13 Oct 2017
Page 260
16.4.1.3.1 NUMBER OF INTRUDERS Section
This section includes a dropdown button allowing the instructor to set the number of
intruders. Tap the button to expand selection, then tap to select the number of
intruders.
16.4.1.3.2 ALTITUDE SEPARATION MODEL Section
This section includes radio buttons allowing the instructor to select either one of these
models:
• Downwind
• Holding Pattern
• Crosswind
• Final
• Mixed
The selected number of intruders will be placed on the selected model.
16.4.1.3.3 INTRUDER TRANSPONDER SETTINGS
This section allows the instructor to set the type of Altitude Reporting and ADS-B
Reporting of the intruder’s transponder.
Altitude Reporting functions as described in paragraph 16.4.1.1.4.1.
Setting of the ADS-B Reporting parameter consists of selecting either one of the three
ADS-B radio buttons:
No ADS-B Reporting
Displays status and selection does not allow the
transponder of intruders to transmit their ADS-B
information. When No ADS-B Reporting is checked,
ADS-B information is not being reported.
ADS-B Reporting
Displays status and selection allows the transponder of
intruders to transmit their ADS-B information such as
position, speed and direction of flight (latitude, longitude,
vertical speed etc…). When ADS-B Reporting is checked,
ADS-B information is being reported.
Mixed
Displays status and selection will set certain numbers of
intruders with ADS-B reporting and others with No ADS-
B reporting.