Instructor User Guide
REFERENCE AIRPORT Tab
REFERENCE AIRPORT Tab
13 Oct 2017
Page 103
9.2.1.5 Auto Reference Location
The Auto Reference Location checkbox allows the instructor to control how the
reference airfield is updated. This checkbox toggles between two modes: Auto and
Manual.
9.2.1.5.1 Auto Mode
Auto Mode allows automatic updates of the reference airfield to the nearest available
runway until the nearest is the arrival airfield (then the reference airfield locks to the
arrival airfield and runway). Selection unlocks if manual mode is selected or the
arrival airfield is changed.
9.2.1.5.2 Manual Mode
In Manual mode, the reference airfield and runway do not change unless there is a
new input from the instructor or the lesson plan.
9.2.2 AIRPORT REPOSITION Tab
The AIRPORT REPOSITION tab includes all the necessary controls to allow the
instructor to:
• Reposition the aircraft to preset positions.
• Adjust the lighting intensity of various runway sections.
• Adjust the intensity of the runway lights.
• Trigger failures of reference runway localizer and glideslope transmitters.
This tab includes the following sections:
• HOLD / TAXI
• GATE / PARKING SPOT
• Reposition Presets
• Runway Lighting
To Next Page
Loading...