Fujitsu PRIMERGY RX2530 M4

RX2530 M4 Upgrade and Maintenance Manual 289
Processor (CPU)
Supported CPUs
– up to two Intel
®
Xeon
®
CPUs (Platinum, Gold, Silver, Bronze)
– two CPU sockets P0 LGA 3647
– supported CPUs up to 205 W
– core frequencies of more than 3.5 GHz
– both CPUs must be of the same type
I For system relevant information, see the hardware configurator of your
server available online at the following address:
http://ts.fujitsu.com/products/standard_servers/index.htm
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
V CAUTION!
Depending on the CPU type, there are different heat sink types available
(see figure 106 on page 195).
Ê Always check, if CPU type and heat sink type are compatible.
Figure 196: Example heat sink label
The heat sink type is printed on the label.