342 Upgrade and Maintenance Manual RX2530 M4
13.1.4 Replacing the ODD
13.1.4.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Removing backup and optical disk media" on page 80
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
13.1.4.2 Removing the defective ODD
Ê Remove the ODD, see section "Removing the ODD" on page 339.
13.1.4.3 Installing the new ODD
Ê Install the ODD, see section "Installing the ODD" on page 337.
13.1.4.4 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 98
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: – Torx Plus 6 screw driver (not valid for Japan)
– Phillips PH1 / (+) No. 1 screw driver (Japan)
To Next Page
Loading...
