Garmin G2000 - Page 274

Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A260
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeSinDeX
6) Touch the Load Arrival Button to display the Arrival Selection Screen.
7) Touch the Arrival Button to display the Select Arrival Screen with a list of available arrivals.
8) Scroll the list if necessary and touch an arrival selection button to select the arrival and return to the Arrival
Selection Screen.
9) Touch the Transition Button to display the Select Transition Screen with a list of available transitions.
10) Scroll the list if necessary and touch a transition selection button to select the transition and return to the Arrival
Selection Screen.
11) Touch the Runway Button to display the Select Runway Screen with a list of available runways.
12) Scroll the list if necessary and touch a runway selection button to select the runway and return to the Arrival
Selection Screen.
13) Touch the Preview Button, then the Show on Map Button to show the preview of the arrival.
14) Touch the Load Button to insert the arrival into the stored flight plan.
Figure 5-108 Edit Stored Flight Plan Screen - Arrival Inserted
Inserted Arrival Header
- Arrival Identifier: [destination
airport]-[arrival transition].
[arrival].[arrival runway]
(e.g., KCOS-TBE.DBRY2.ALL)
Stored Flight Plan Name
Figure 5-109 Stored Flight Plan Pane - Arrival Inserted
Loaded Arrival
Destination Airport
This manual downloaded from http://www.manualowl.com